How To Drain R134A From Car
How To Drain R134A From Car. Park the car and let it cool before beginning to drain it. This will allow air to get into the ac system.
Turn on your car and a/c. Then hook up the vacuum pump to the yellow line and to the tank. You can buy one from hf for $32 or maybe borrow one from autozone or the like.
#5 · Apr 17, 2005.
Park the car and let it cool before beginning to drain it. To recharge or top off the refrigerant in your car’s air conditioning system you will first need to turn your car on, turn your air conditioner on to the highest fan setting, set to the coldest setting and open the vehicle doors to prevent the air conditioner from shutting off when it gets cool in the cabin. The condenser will have the most debris of any component and may not be flushable.
Open Both The Blue And Red Valves On The Front Of The Machine.
And want to put it back in afterwards. It makes the refrigerant removal easier. As some of the cooling substance will be in liquid form, the machine will drop the system’s pressure to turn them into vapor.
You Will Also Need To Physically Check The System And See If You Can See Any Oil Leaking.
The new gwp regulatory limit is 150. Then hook up the vacuum pump to the yellow line and to the tank. Yes you can be fined by the epa if you get caught.
This Causes The Refrigerant To Turn To Vapor And Leave The System.
This will allow air to get into the ac system. I know there will be howls of rage over this, but it’s your car and you can do what you want with it. This strategy will decrease the amount of pumping and draining you have to do, and leaves you with less gas to store or dispose of.
This Tutorial Is Specifically For The R134A Type Of Refrigerant That Newer Use.
The low side is located on the drivers side and the high side is by the condencer. Turn the car on and run your ac. Unless you have the wrong fuel in the tank, turn the car on and run the gas down towards empty by driving around.
Post a Comment for "How To Drain R134A From Car"